Reference Guide

--chasintrusion
Valid Argument enable, disable, silentenable
Description Enables or disables the system to detect and report chassis intrusion events to
the system display on boot-up.
Example
C:\>cctk --chasintrusion=enable
chasintrusion=enable
--chassisintrustatus
Valid Argument dooropen, tripped, doorclosed, tripreset
Description
Displays the status of chassis intrusion. All the values are read-only except
tripreset.
• dooropen — Indicates chassis door is opened.
• tripped — Indicates the chassis door is opened since the last time the
sensor detection logic was reset.
• doorclosed — Indicates chassis door is closed.
• tripreset — Resets the sensor detection logic to detect the next closed-
to-open transition on the chassis door.
Example
C:\>cctk --chassisintrustatus=tripreset
chassisintrustatus=tripreset
--clearsel
Valid Argument yes, no
Description Allows the system to erase or retain the contents of the system event log
when the system boots the next time.
Example
C:\>cctk --clearsel=no
clearsel=no
--cmosdefaults
Valid Argument enable, disable
Description Enables or disables the request for a default of CMOS values when the system
reboots.
Example
C:\>cctk --cmosdefaults=enable
cmosdefaults=enable
36