Reference Guide

--activebootlist
Description
Activates the boot list to UEFI or Legacy. On reboot, the system boots based
on the boot list specified.
NOTE: With --activebootlist, do not specify any other sub options, such
as --sequence, --enabledevice, and --disabledevice.
Example
C:\>cctk bootorder --activebootlist=uefi
--bootlisttype
Description
Specifies the boot list as UEFI or Legacy. If you want to run any bootorder
options, such as sequence, enabledevice, and so on, on the UEFI boot list, you
must specify this sub option with UEFI argument. The supported arguments
are Legacy and UEFI.
If --bootlisttype is not specified, running the bootorder sub options applies
changes on the Legacy boot list.
Example
C:\>cctk bootorder --bootlisttype=uefi
Example With Sub
Options
With the --bootlisttype=uefi option, you can specify the following sub
options: --sequence , --enabledevice , and --disabledevice .
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2 --valsetuppwd=password
--disabledevice
Description Disables a device in the boot sequence. Use the device number or device
short form as the argument.
Example
C:\>cctk bootorder --disabledevice=embnic,hdd.1
or
C:\>cctk bootorder --disabledevice=1,3
Example With Sub
Options
C:\>cctk bootorder --sequence=hdd.1,floppy
--enabledevice=cdrom,hdd.2 --disabledevice=
nic.1,hdd.3
--enabledevice
Description Enables a device in the boot sequence. Use the device number or device
short form as the argument.
Example
C:\>cctk bootorder --enabledevice=embnic,hdd.1
or
C:\>cctk bootorder --enabledevice=1,3
33