Reference Guide

--bltinpntdevice

Valid Argument enable, disable

Description Enables or disables built-in pointing device.

Example

C:\>cctk --bltinpntdevice=disable

bltinpntdevice=disable

--bluetoothdevice

Valid Argument enable, disable

Description Enables or disables bluetooth device.

Example

C:\>cctk --bluetoothdevice=disable

bluetoothdevice=disable

--bluetoothstealthmode

Valid Argument unchanged, turnoff

Description

Configures the state of bluetooth radio depending on the Stealth mode is

enabled or disabled.

• turnoff— Turns of the bluetooth radio if the stealth mode is enabled.

• unchanged— Retains the current state of the bluetooth.

Example

C:\>cctk --bluetoothstealthmode=turnoff

bluetoothstealthmode=turnoff

--bootfailthreshold

Valid Argument

0, 1, 2, 3

Description Configures the threshold value for the operating system boot failure. Enables

or disables the system for auto-invoke of Dell Enhanced Pre-Boot System

Diagnostics (ePSA) program.

• 0 — If the threshold value is set to 0, then auto-invoke of ePSA program

will be disabled.

• 1 to 3 — If operating system consecutively fails to boot for equal to or

more number of times than specified as Boot fail threshold value, then

the system will boot to start ePSA program.

Example

C:\>cctk --bootfailthreshold=2

bootfailthreshold=2