Reference Guide

--blinkpsu1led
Valid Argument enable
Description
Sets the first Power Supply (PSU 1) status LED to blink. Enabling the LED to
blink helps to recognize the power supply probe in use, while using ASM
feature. For more details, see Advanced System Management.
NOTE: This option is supported only on systems that support ASM.
Example
C:\>cctk --blinkpsu1led=enable
blinkpsu1led=enable
--blinkpsu2led
Valid Argument enable
Description
Sets the second Power Supply (PSU 2) status LED to blink. Enabling the LED to
blink helps to recognize the power supply probe in use, while using ASM
feature. For more details, see Advanced System Management.
NOTE: This option is supported only on systems that support ASM.
Example
C:\>cctk --blinkpsu2led=enable
blinkpsu2led=enable
--blocks3
Valid Argument enable, disable
Description
Enables or disables the Block S3 sleep state. When enabled, the system BIOS
blocks all OSPM/ACPI S3 (Suspend to RAM) requests and enforces the preboot
authentication on all non-S3 resumes. When disabled, the system BIOS allows
all Operating System-directed configuration and Power Management (OSPM)
or Advanced Configuration and Power Interface (ACPI) S3 suspend to
Random Access Memory (RAM) operation. This moves the system
authentication to the operating system and prevents any preboot
authentication on resume.
Example
C:\>cctk --blocks3=enable
blocks3=enable
--bltinfloppy
Valid Argument disable, auto
Description Enables or disables built-in floppy controller.
Example
C:\>cctk --bltinfloppy=disable
bltinfloppy=disable
30