Reference Guide

--asset
Valid Argument <string>
Description Displays or sets the customer-programmable asset tag number for a system.
The maximum length of an asset tag is 10 characters. Asset tag values should
not contain any spaces.
Example
C:\>cctk --asset=ASSETTAG
--assignintr
Valid Argument standard, distributed
Description
This option controls the interrupted assignment of PCI devices in the system.
This option is set to standard by default, causing standard interrupt routing
that uses INTA, B, C, D for all PCIe devices. When set to distributed, the
interrupt routing is rerouted at the MCH root ports to minimize sharing of
interrupts across all PCIe (and PCI-X in PIC mode) devices.
Example
C:\>cctk --assignintr=distributed
assignintr=distributed
--atgsystem
Valid Argument on, off
Description Sets or removes the Complementary Metal Oxide Semiconductor (CMOS) bit
to indicate whether the system uses an All Terrain Gear (ATG) base or not.
Example
C:\>cctk --atgsystem=off
atgsystem=off
--audiomode
Valid Argument disable, halfduplex, fullduplex
Description
Sets the audio mode to any of the following values:
• disable — Completely releases the onboard hardware resources.
• halfduplex — Allows only record or playback at a time.
• fullduplex — Allows record and playback simultaneously.
Example
C:\>cctk --audiomode=halfduplex
audiomode=halfduplex
--autoon
Valid Argument disable, weekdays , everyday, selectdays
Description
Configures the auto on option for a system. Using this option you can
configure the days on which the system has to turn on automatically.
26