Reference Guide

--propowntag

Valid Argument NA

Description

Sets the Dell property ownership tag. If an option is not given, Dell Command

| Configure reports the current property ownership tag.

NOTE: The maximum length of property ownership tag is 80 characters

for desktops and 48 characters for laptop.

Example

C:\>cctk --propowntag

--version

Valid Argument Read-only

Description Displays the version information, current time, and date for the utility. This is a

read-only option.

Example

C:\>cctk --version

Dell Command Configure Version 3.1.0 258 (Windows - Feb 25

2015, 14:38:43)

BIOS options

The following list describes Dell Command | Configure options and arguments along with a description

of their expected behavior. Options and arguments are case sensitive. All options and predefined

arguments are lowercase unless stated otherwise.

NOTE: Some of the following options or arguments may not be available on all systems due to the

BIOS version or hardware feature set. Entering Dell Command | Configure on a command line

without arguments display only those options that are valid for your system. For more details about

the options, see No option.

NOTE: If you configure a setup password and system password for the system, while changing a

BIOS value, type the setup password.

--acpower

Valid Argument off, last, on

Description

Sets the behavior of the system after Alternating Current (AC) power is lost.

• off — When AC power is restored, the system remains turned off.

• on — When AC power is restored, the system turns on.

• last — When the AC power is restored, the system returns to the state it

was in when the power was lost.

Example

C:\>cctk --acpower=off

acpower=off