Reference Guide

4
Sample file formats
This appendix lists the sample Dell Command | Configure utility.ini file.
Sample Dell Command | Configure utility.ini file format
[cctk]
sysname=Latitude E7440
sysid=05CB
biosver=X27
svctag=SL511C1
;do not edit information above this line
acpower=off
admsetuplockout=disable
advbatterychargecfg=disable
advsm=VOLTAGE_1:NA,NA
advsm=VOLTAGE_2:NA,NA
advsm=CURRENT_1:NA,NA
advsm=CURRENT_2:NA,NA
advsm=TEMPERATURE_1:NA,NA
advsm=TEMPERATURE_2:NA,NA
advsm=TEMPERATURE_3:NA,NA
asfmode=alertonly
asset=
Dell
autoon=disable
autoonhr=0
autoonmn=0
blocks3=disable
bluetoothdevice=enable
bootorder=legacytype,+floppy,+hdd,+usbdev,+cdrom,+embnic
;Here '+' indicates Enabled device, '-' indicates Disabled device.You can use
DeviceNumber also to set the boot order. Example: bootorder=+2,-1,+3
camera=enable
cellularradio=enable
controlwlanradio=disable
controlwwanradio=disable
cpucore=all
cpuxdsupport=enable
cstatesctrl=enable
embnic1=on
embsataraid=ahci
energystarlogo=disable
esataports=enable
externalhotkey=scrolllock
fastboot=thorough
;firstpowerondate=
forcepxeonnextboot=disable
hdfreefallprotect=enable
integratedaudio=enable
intlsmartconnect=disable
109