Reference Guide

If the system has a setup password, while setting the non-critical threshold values specify the setup
password and set the non-critical threshold values as:
cctk advsm --set=<option name>:<upper non critical threshold value> --
valsetuppwd= <setup password>
For example, to set the non-critical threshold values for a voltage probe on a system with a setup
password, type:
cctk advsm --set=voltage_1:55 --valsetuppwd = <setup password>
For example, to set the non-critical threshold values for a current probe on a system with a setup
password, type:
cctk advsm --set=current_1:55 --valsetuppwd = <setup password>
For example, to set the non-critical threshold values for a cooling probe on a system with a setup
password, type:
cctk advsm --set=cd_1:55 --valsetuppwd = <setup password>
For example, to set the non-critical threshold values for a temperature probe on a system with a setup
password, type:
cctk advsm --set=temperature_1:55 --valsetuppwd = <setup password>
If the system has a system password and no setup password, while setting the non-critical threshold
values specify the system password and set the non-critical threshold values as:
cctk advsm --set=<cctk option name>:<upper non critical threshold value> --
valsyspwd= <system password>
For example, to set the non-critical threshold values for a voltage probe on a system with a system
password and no setup password, type:
cctk advsm --set=voltage_1:10 --valsyspwd = <system password>
For example, to set the non-critical threshold values for a current probe on a system with a system
password and no setup password, type:
cctk advsm --set=current_1:10 --valsyspwd = <system password>
For example, to set the non-critical threshold values for a cooling probe on a system with a system
password and no setup password, type:
cctk advsm --set=cd_1:10 --valsyspwd = <system password>
For example, to set the non-critical threshold values for a temperature probe on a system with a system
password and no setup password, type:
cctk advsm --set=temperature_1:10 --valsyspwd = <system password>
PCI reporting
The scan of the PCI bus will use a file to resolve PCI vendor and device codes to vendor information
strings. The format of the PCI output is as follows:
PCI Bus: 2, Device: 4, Function: 0
Vendor: 8086 - Intel Corp.
Device: 1229 - 82557/8/9 [Ethernet Pro 100]
Sub Vendor:8086 - Intel Corp.
107