Reference Guide

Table 4. ASM probes and options
ASM Probes Options
Voltage v
Current c
Temperature t
Power supply p
Cooling device f
All probes all
Displaying the probe details
You can display the details of power supply, voltage, current, temperature, and cooling device probes.
To display the probe details, type:
cctk advsm --report=<option>
NOTE: Here, option represents v, c, t, p, f, or all.
For example, to display the details of voltage probe, type:
cctk advsm --report=v
To display the details of all the available probes, type:
cctk advsm --report=all
Setting the non-critical threshold values
You can set the non-critical threshold values for voltage, current, cooling and temperature probes.
To set the non-critical threshold values for a probe, type:
cctk advsm --set=<cctk option name>:<upper non critical threshold value>
NOTE: Here, cctk option name is the component for which you want to set the non-critical
threshold values in a probe. You can obtain the cctk option name for a probe using the report
command.
For example, to set the non-critical threshold values for a voltage probe, type:
cctk advsm --set=voltage_1:10
For example, to set only the upper non-critical threshold value for a current probe, type:
cctk advsm --set=current_1:100
For example, to set the non-critical threshold values for a cooling probe, type:
cctk advsm --set=cd_1:10
For example, to set only the upper non-critical threshold value for a temperature probe, type:
cctk advsm --set=temperature_1:100
106