Reference Guide

• idn — (Indonesia) Sets the WLAN region code for Indonesia only.
Example
C:\>cctk --wlanregioncode=eur
wlanregioncode=eur
--wlanstealthmode
Valid Argument unchanged, turnoff
Description
Configures the state of the WLAN (WiGig) radio depending on the Stealth
mode is enabled or disabled.
• unchanged— Retains the current state of the WLAN (and WiGig) radio.
• turnoff— Turns off the WLAN (and WiGig) radio if the stealth mode is
enabled.
Example
C:\>cctk --wlanstealthmode=turnoff
wlanstealthmode=turnoff
--wswitchwlanwigigctrl
Valid Argument enable, disable
Description
Enables or disables the effect of physical wireless switch on wireless LAN and
WiGig radio.
• enable — If the wireless physical switch is on, turns the wireless LAN on
and WiGig radio on. If the wireless switch is off, turns the wireless LAN on
and WiGig radio off.
• disable— The wireless physical switch does not effect the wireless LAN
and WiGig radios.
Example
C:\>cctk --wswitchwlanwigigctrl=enable
wswitchwlanwigigctrl=enable
--wswitchgpsonwwanradio
Valid Argument enable, disable
Description
Enables or disables the effect of physical wireless switch on the GPS radio of
the wireless WAN card.
• enable — If enabled, wireless switch turns the GPS radio of the wireless
WAN card on or off.
• disable — If disabled, wireless switch does not have any effect on the state
of the GPS radio of the wireless WAN card.
Example
C:\>cctk --wswitchgpsonwwanradio=enable
wswitchgpsonwwanradio=enable
104