Deployment Guide

Creating a Microsoft Windows PE 3.0 64-bit image

1. Run cctk_x86_64_WinPE_3.bat C:\WinPE3_64bit C:\Progra~2\Dell\Comman~1.

NOTE: Make sure that the path used in the command is that of the Dell Command | Configure

folder.

2. Browse to C:\WinPE3_64bit\WIM and burn the image.

Creating a Microsoft Windows PE 3.0 32-bit image

1. Run cctk_x86_winpe_3.bat C:\WinPE3_32bit C:\Progra~1\Dell\Comman~1.

NOTE: Make sure that the path used in the command is that of the Dell Command | Configure

folder.

2. Browse to C:\WinPE3_32bit\WIM and copy the image.

Integrating the Dell Command | Configure directory structure into a WIM file

using Microsoft Windows PE 2.0

Dell Command | Configure provides the cctk_x86_winpe.bat and cctk_x86_64_winpe.bat scripts to

integrate Dell Command | Configure HAPI, and related Dell drivers into the WIM file. To integrate the Dell

Command | Configure directory structure into a WIM file:

1. Browse to the directory where the script is located.

NOTE: By default, the script for 32-bit systems is located at C:\Program Files\Dell\Command

Configure\x86 directory. The script for 64-bit systems is located at Command Configure

\x86_64 directory.

2. Run the appropriate script with the WMI file and Dell Command | Configure directory locations

entered as two arguments: cctk_winpe.bat <path_of wim_file> <path_of_Command

Configure>. If Dell Command | Configure is installed in the default directory, run the following

script:

• For 32-bit system, cctk_x86_winpe.bat C:\winPE_x86 C:\Progra~1\Dell\Comman~1

• For 64-bit system, cctk_x86_64_winpe.bat C:\winPE_x86_64 C:\Progra~2\Dell

\Comman~1

NOTE: Make sure that the path used in the command is that of the Command Configure folder.

The files required to create the bootable ISO image and a WIM file -winpe.wim are created at the

same location.

3. Rename the <path_of_wim_file>\winpe.wim file as boot.wim.

4. Overwrite the <path_of_wim_file>\ISO\sources\boot.wim file with the <path_of_wim_file>

\boot.wim file.

For example, copy C:\winPE_x86\boot.wim C:\winPE_x86\ISO\sources\boot.wim.

5. Create a bootable Windows PE image using Windows AIK.