Deployment Guide

NOTE: Make sure that the path used in the command is that of the Dell Command | Configure

folder.

4. Browse to C:\winpe_x86_64\WIM and copy the ISO image.

Creating a Microsoft Windows PE 5.0 32-bit image

1. Browse to C:\Program Files\Dell\Command Configure\X86.

2. Open the command prompt with administrator privileges.

3. Run the following command: cctk_x86_winpe_5.bat C:\winpe_x86 C:\Progra~1\Dell

\Comman~1.

NOTE: Make sure that the path used in the command is that of the Dell Command | Configure

folder.

4. Browse to C:\winpe_x86\WIM and copy the ISO image.

Integrating the Dell Command | Configure directory structure into an ISO file

using Microsoft Windows PE 4.0

1. Install the Windows 7 SP1 or Windows 8 operating system.

2. Download and install Windows ADK for Windows 8.

3. Create a Windows PE 4.0 image.

Related Links:

• Creating Microsoft Windows PE 4.0 64-bit image

• Creating Microsoft Windows PE 4.0 32-bit image

Creating a Microsoft Windows PE 4.0 64-bit image

1. Browse to C:\Program Files (x86)\Dell\Command Configure\X86_64.

2. Open the command prompt with administrator privileges.

3. Run the following command: cctk_x86_64_winpe_4.bat C:\winpe_x86_64 C:

\Progra~2\Dell\Comman~1

NOTE: Make sure that the path used in the command is that of the Dell Command | Configure

folder.

4. Browse to C:\winpe_x86_64\wim and copy the ISO image.

Creating a Microsoft Windows PE 4.0 32-bit image

1. Browse to C:\Program Files\Dell\Command Configure\X86.

2. Open the command prompt with administrator privileges.

3. Run the following command: cctk_x86_winpe_4.bat C:\winpe_x86 C:\Progra~1\Dell

\Comman~1

NOTE: Make sure that the path used in the command is that of the Dell Command | Configure

folder.

4. Browse to C:\winpe_x86\WIM and copy the ISO image.