Deployment Guide

Installing Dell Command | Configure on

systems running Linux

NOTE: Dell Command | Configure GUI is not supported on systems running the Linux operating

system.

1. From dell.com/support, download the command_configure-linux-<version>-<buildnum>.tar.gz

file.

2. Untar the file using the following command: tar -zxvf command_configure-linux-

<version>-<buildnum>.tar.gz

3. Install the RPMs in the file.

Related Links:

• Installing Dell Command | Configure on systems running Red Hat Enterprise Linux 7

• Installing Dell Command | Configure on systems running Red Hat Enterprise Linux 6

• Installing Dell Command | Configure using Deb package

Installing Dell Command | Configure on systems running

Red Hat Enterprise Linux 7

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 7 systems using 64-bit

RPMs, untar the file, and run the commands in the following order:

1. rpm -ivh srvadmin-hapi-8.2.0-1650.7979.el7.x86_64.rpm

2. rpm -ivh command_configure-linux-3.1.0-<buildnum>.el7.x86_64.rpm

Installing Dell Command | Configure on systems running

Red Hat Enterprise Linux 6

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 6 systems using 64-bit

RPMs, untar the file, and run the commands in the following order:

1. rpm -ivh srvadmin-hapi-8.2.0-1650.7979.el6.x86_64.rpm

2. rpm -ivh command_configure-linux-3.1.0-<buildnum>.el6.x86_64.rpm