Users Guide

To configure the peak shift battery charging:

1. Click the required option:

• Create Multiplatform Package

• Create Local System Package

• Open a Saved Package

NOTE: To open a saved package, click Open a Saved Package, browse to the file location and

click Open.

2. Click Edit or double-click the option.

3. In the peakshiftcfg option row, click View/Change in the Value to set column.

The Dell Command | Configure - Peak Shift Battery Settings screen is displayed.

4. Enable the peak shift settings option.

5. Select the day of the week.

NOTE: To apply the same settings to all the days select the Apply these settings to other days

check box.

6. From the Operate only on battery drop-down list, select the time from when you want the system

to operate only on battery.

7. From the Operate only on AC drop-down list, select the time from when you want the system to

operate only on AC.

8. From the Resume normal power/charge drop-down list, select the time from when the system has

to start using the AC power and recharging the battery.

NOTE: The system adjusts the value in the drop-down list to meet the following criteria:

• Operate only on battery time should be less than or equal to the time specified for Operate

only on AC.

• Operate only on battery time and Operate only on AC time should be less than or greater

than the Resume normal power/charge time.

9. Click OK.

NOTE: Select Apply these settings to other days check box to apply the same settings for all

days of the week.

Advanced System Management

Advanced System Management (ASM) is a feature supported on Dell Precision R7610, T5810 ,T7810,

T7910 and later workstations. The feature displays information about voltage, temperature, current,

cooling device, and power supply probes. The feature also allows you to set the non-critical upper

threshold values of voltage, current, cooling, and temperature probes.

Setting the noncritical threshold values

NOTE: You can set the critical and non-critical upper threshold values only for voltage, current,

cooling and temperature probes.

To set the non-critical threshold values for the probes:

1. Click the required option:

• Create Multiplatform Package