Users Guide

3. Enter a blank space in the Confirm Password text box to confirm the password.

If both the entries match, the a green check mark is displayed next to the Confirm Password text

box, else, a red X mark is displayed.

4. Click Save.

BIOS setup or system password screen

Perform the following steps to export the BIOS configuration:

1. Click the EXPORT.EXE option to export the BIOS configuration as a an EXE file.

2. The BIOS Setup or System Password screen is displayed prompting you to type a password.

3. If the target system has a setup or system password, then select the Use the password information

below option and type the same setup or system password in the BIOS Setup or System Password

screen.

4. If the target system does not have a setup or system password, then select No password is required.

Password protection screen

While exporting a file or report with system or setup password, a password protection screen is displayed.

To export the file with the password as clear text, click Continue. To export the file without the password,

click Mask.

Configuring the autoon option

You can configure the days on which the system has to automatically turn on using the autoon option

from the Power and Performance Management category.

To configure the days:

1. Click the required option:

• Create Multiplatform Package

• Create Local System Package

• Open a Saved Package

NOTE: To open a saved package, click Open a Saved Package, browse to the file location and

then click Open.

2. Click Edit or double-click the option.

3. In the autoon option row, click View/Change in the Value to set column.

The auto on screen is displayed.

4. Select one of the following options from Dell Command | Configure - Auto On screen.

• Disabled — Select this option to turn off the feature.

• Weekdays — Select this option to turn on the target system automatically only on weekdays.

• Every Day — Select this option to turn on the target system automatically everyday.

• Selected Days — Select this option to choose the days on which the target system has to turn on

automatically.

5. Click Save.