Reference Guide
--peakshiftcfg
Valid Argument enable, disable
Description
Enables or disables the Peak Shift battery conguration. Using Peak Shift conguration, you can
minimize the consumption of AC power during the peak power usage period of the day using the
enable and disable options. You can set a start and end time for the Peak Shift period. During this
period, the system runs on battery if the battery charge is above the set battery threshold value.
After the Peak Shift period, the system runs on AC power without charging the battery. The
system functions normally using AC power and recharging the battery after the specied Charge
Start Time.
NOTE: To use peakshiftcfg, set the values of Operate only on battery,
Operate only on AC, and Resume normal power/charge are necessary. The
values must be set in such a way that Peak shift start time <= Peak shift end time <=
Peak shift charge start time.
NOTE: The value of hour must be in the range 0–23 and minute must be 0,15, 30, or 45.
To set 12 a.m., provide the hour value as 00.
Example
To enable Peak Shift battery conguration:
C:\>cctk --peakshiftcfg=enable
peakshiftcfg=enable
To enable Peak Shift battery conguration on specic days for a specic period:
C:\>cctk --
peakshiftcfg=enable,mon-10:30/14:00/16:00,tue-10:30/14:00/16:30
To disable Peak Shift battery conguration:
C:\>cctk --peakshiftcfg=disable
peakshiftcfg=disable
--penmisindication
Valid Argument
enable, disable
Description Enables or disables the missing pen indication. This property is used to control Tablet PC pen
removal. If the pen has been removed out of the retaining well, the pen LED will blink.
Example
C:\>cctk --penmisindication=enable
penmisindication=enable
--penresumeon
Valid Argument
enable, disable
Description Enables or disables the resume on pen setting.
Example
C:\>cctk --penresumeon=disable
penresumeon=disable
--pntdevice
Valid Argument
externalserialonly, externalps2only, switchtotouchpad, switchtoexternalps2
Description Sets the pointing device.
58