Reference Guide

Example
C:\>cctk --pcimmiospacesize=small
pcimmiospacesize=small
--pciresallocationratio
Valid Argument allocateevenly, allocatemoretocpu1
Description Allocates PCI resources, buses, memory-mapped I/O (MMIO) space, and I/O space. If set to
allocateevenly, equal amount of memory is allocated to all the resources when two CPUs are
installed. When set to allocatemoretocpu1, larger amount of device-specic memory is allocated,
which in turn reduces the usable memory on a system with a 32-bit operating system.
Example
C:\>cctk --pciresallocationratio=allocateevenly
pciresallocationratio=allocateevenly
--pcisata
Valid Argument enable, disable
Description Enables or disables the PCI Serial ATA controller.
Example
C:\>cctk --pcisata=enable
pcisata=enable
--pcislots
Valid Argument
enable, disable
Description Enables or disables the add-in PCI slots of the system.
Example
C:\>cctk --pcislots=enable
pcislots=enable
--pcmcia
Valid Argument
enable, disable
Description Enables or disables the PCMCIA device slot.
Example
C:\>cctk --pcmcia=enable
pcmcia=enable
--peakshiftbatterythreshold
Valid Argument
integers ranging from 15 to 100
Description
Sets the value of Peak Shift battery threshold. When the Peak Shift battery threshold level is
reached, the system starts using AC power. Setting the value to 0 percent, allows the system to
use power only from the battery during Peak Shift duration (Peak Shift Start time and Peak shift
End time).
Example
C:\>cctk --peakshiftbatterythreshold=50
peakshiftbatterythreshold=50
57