Reference Guide

--mediacardand1394
Valid Argument enable, disable
Description Enables or disables the media card and 1394 devices.
Example
C:\>cctk --mediacardand1394=enable
mediacardand1394=enable
--mem
Valid Argument Read-only
Description Reports the amount of system memory physically installed in the system, not the amount of
memory available to an operating system. The last two characters of the memory value indicate
the order of magnitude used (Kilo Byte (KB) or Mega Byte (MB)).
Example
C:\>cctk --mem
mem=4096 MB
--memdiagnostic
Valid Argument enable, disable
Description
Enables or disables the memory diagnostic.
Example
C:\>cctk --memdiagnostic=enable
memdiagnostic=enable
--memintleave
Valid Argument
enable, disable
Description
Enables or disables memory interleave mode.
Example
C:\>cctk --memintleave=enable
memintleave=enable
--memremap
Valid Argument
o, auto
Description
Enables or disables memory remapping.
Example
C:\>cctk --memremap=off
memremap=off
49