Reference Guide

Example

C:\>cctk --limitcpuidvalue=on

limitcpuidvalue=on

--logicproc

Valid Argument enable, disable

Description Enables or disables hyper threading on the next system boot. On some Dell platforms, that support

multi-core processor technology, this is enabled or disabled though the platform does not support

hyper threading. In this case, this command may enable or disable multi-core processor

technology.

Example

C:\>cctk --logicproc=enable

logicproc=enable

--lpt

Valid Argument lpt1, lpt2, lpt3

Description Denes the parallel port conguration. lpt1 enables the built-in parallel port of the system to

operate in LPT1 mode, using Input/Output (I/O) address 378. lpt2 enables the system’s built-in

parallel port to operate in LPT2 mode, using I/O address 278. lpt3 enables the built-in parallel port

to operate in LPT3 mode, using I/O address 3BC.

Example

C:\>cctk --lpt=lpt1

lpt=lpt1

--lptmode

Valid Argument

disable, at, ps2, ecp, epp, ecpdma1, ecpdma3

Description

Determines how the parallel ports operate. Set the parallel port to:

• disable — Disables the built-in parallel port of the system.

• at — Enables the built-in parallel port of the system to operate in AT mode (output-only).

• ps2 — Enables the built-in parallel port of the system to operate in PS/2 mode (bi-directional).

• ecp — Enables the built-in parallel port of the system to operate in Extended Capability Port

(ECP) mode, no DMA channel assigned.

• epp — Enables the built-in parallel port to operate in Enhanced Parallel Port (EPP) mode.

• ecpdma1 — Enables the system’s built-in parallel port of the system to operate in ECP mode

DMA channel 1.

• ecpdma3 — Enables the built-in parallel port of the system to operate in ECP mode DMA

channel 3.

Example

C:\>cctk --lptmode=at

lptmode=at

--mediacard

Valid Argument

enable, disable

Description Enables or disables the media card.

Example

C:\>cctk --mediacard=enable

mediacard=enable