Reference Guide

--keypad

Valid Argument enabledbynumlock, enabledbyfnkey

Description Enables the keypad in two dierent ways — numlock and function key.

Example

C:\>cctk --keypad=enabledbynumlock

keypad=enabledbynumlock

--lastbiosupdate

Valid Argument Read-only

Description Identies the major release of the system BIOS.

Example

C:\>cctk --lastbiosupdate

lastbiosupdate=10/30/2009

--latitudeon

Valid Argument enable, disable

Description Enables or disables booting to Latitude ON.

Example

C:\>cctk --latitudeon=enable

latitudeon=enable

--latitudeonash

Valid Argument

enable, disable

Description Enables or disables the ability to boot to the Latitude ON Flash module.

Example

C:\>cctk --latitudeonflash=enable

latitudeonflash=enable

--legacyorom

Valid Argument

enable, disable

Description

Enables or disables the BIOS detection and the usage of Legacy expansion ROMs.

NOTE: You cannot enable legacyorom with Secure boot.

Example

C:\>cctk --legacyorom=enable

legacyorom=enable

--limitcpuidvalue

Valid Argument

on, o

Description Limits the maximum value the processor standard CPUID function supports. Some operating

system will be unable to install if the maximum CPUID function supported is greater than 3. If set

to on, the CPUID function is limited to 3. If set to o, the CPUID function is not limited to 3.