Reference Guide
Example
C:\>cctk --iptt=show
iptt=show
--irsttimer
Valid Argument integers ranging from 0 to 999
Description Congures the timeout value (in minutes) for Intel Rapid Start Technology (IRST) mode. After the
set timeout, the system enters IRST mode from the S3 system sleep mode. The acceptable values
are in the range 0-999.
Example
C:\>cctk --irsttimer=5
irsttimer=5
--keyboardbacklightonacpower
Valid Argument enable, disable
Description
Enables or disables the keyboard backlight when the system is running on Alternating Current (AC)
power or if an AC power adapter is plugged in.
• enable — Enables the keyboard backlight even after the 10 seconds of inactivity.
• disable — Disables the timer that fades the keyboard backlight after 10 seconds of inactivity.
Note: If the keyboard backlight is disabled by pressing <Fn> + <F10>, then the keyboard backlight
remains turned o, even if the AC power adapter is plugged in.
Example
C:\>cctk --keyboardbacklightonacpower=enable
keyboardbacklightonacpower=enable
--keyboardclick
Valid Argument
enable, disable
Description Enables or disables the keyboard click sound.
Example
C:\>cctk --keyboardclick=enable
keyboardclick=enable
--keyboardillumination
Valid Argument
o, on/100, auto, 25, 50, 75
Description
Sets the keyboard illumination to the required light intensity.
• o — Sets the illumination to o.
• on — Sets the illumination to 100 percent.
• auto — Sets the illumination based on ambient light level.
• 25 — Sets the illumination to 25 percent.
• 50 — Sets the illumination to 50 percent.
• 75 — Sets the illumination to 75 percent.
Example
C:\>cctk --keyboardillumination=on
keyboardillumination=on
46