Reference Guide

--forcepxeonnextboot
Valid Argument enable, disable
Description
Enables or disables Force PXE on next boot in BIOS.
If enabled, when the BIOS boots next time, the rst PXE-capable device is inserted as the rst
device in the boot sequence. Enabling this value causes this operation on the next boot only, and
does not cause a change in the dened boot sequence of the system. The BIOS chooses the rst
PXE-capable device as the onboard network controller of the system, if present and enabled, or
the rst bootable network device found in the standard PCI search order of the system-
whichever comes rst.
If disabled, the boot override feature is disabled and the system boot sequence is in eect.
Example
C:\>cctk --forcepxeonnextboot=enable
forcepxeonnextboot=enable
--frontpanelerrdisplaymode
Valid Argument aller, rsterr
Description Congures to report all the errors or only the rst error on the front panel Liquid Crystal Display
(LCD).
Example
C:\>cctk --frontpanelerrdisplaymode=aller
frontpanelerrdisplaymode=aller
--fsbr
Valid Argument
115200, 57600, 19200, 9600
Description
Console redirection fail safe baud rate (in bps).
Example
C:\>cctk --fsbr=115200
fsbr=115200
--fsboptimize
Valid Argument
o, on
Description Enables or disables high bandwidth Front Side Bus (FSB) application optimizations.
Example
C:\>cctk --fsboptimize=off
fsboptimize=off
--genencryption
Valid Argument
enable, disable
Description Enables or disables general purpose encryption.
39