Reference Guide

Example With Sub Options
With the --bootlisttype=ue option, you can specify the following sub options: --sequence , --
enabledevice , and --disabledevice .
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2
C:\>cctk bootorder --bootlisttype=uefi
--sequence=hdd.1,floppy --enabledevice=
cdrom,hdd.2 --valuesetuppwd=password
--disabledevice
Description Disables a device in the boot sequence. Use the device number or device short form as the
argument.
Example
C:\>cctk bootorder --disabledevice=embnic,hdd.1
or
C:\>cctk bootorder --disabledevice=1,3
Example With Sub Options
C:\>cctk bootorder --sequence=hdd.1,floppy
--enabledevice=cdrom,hdd.2 --disabledevice=
nic.1,hdd.3
--enabledevice
Description
Enables a device in the boot sequence. Use the device number or device short form as the
argument.
Example
C:\>cctk bootorder --enabledevice=embnic,hdd.1
or
C:\>cctk bootorder --enabledevice=1,3
--sequence
Description
Sets the bootorder based on the arguments provided. Use the device number or device short form
as the argument.
Example
C:\>cctk bootorder --sequence=embnic,hdd.1
or
C:\>cctk bootorder --sequence=1,3
Example for Unknown
Devices
C:\>cctk bootorder --sequence=x01.1,x01.2
--bootseqset
Valid Argument
disketterst, harddiskonly, devlist, cdromrst
Description
Sets the Initial Program Load (IPL) device sequence for the next system boot.
• disketterst — Sets the devices in the sequence: diskette, hard drive, CD- ROM, and option
ROMs (if available).
• harddiskonly — Sets the devices in the sequence: hard drive and option ROMs (if available).
• devlist — Sets the devices in the sequence: diskette, CD-ROM, hard drive, and option ROMs
(if available).
• cdromrst — Sets the devices in the sequence: CD-ROM, diskette, hard drive, option ROMs
(if available).
28