Reference Guide
--asset
Valid Argument <string>
Description Reports or sets the customer-programmable asset tag number for a system. The maximum length
of an asset tag is 10 characters. Asset tag values should not contain any spaces.
Example
C:\>cctk --asset=ASSETTAG
--assignintr
Valid Argument standard, distributed
Description
This option controls the interrupted assignment of PCI devices in the system. This option is set to
standard by default, causing standard interrupt routing that uses INTA, B, C, D for all PCIe devices.
When set to distributed, the interrupt routing is rerouted at the MCH root ports to minimize
sharing of interrupts across all PCIe (and PCI-X in PIC mode) devices.
Example
C:\>cctk --assignintr=distributed
assignintr=distributed
--atgsystem
Valid Argument
on, o
Description Sets or removes the Complementary Metal Oxide Semiconductor (CMOS) bit to indicate whether
the system uses an All Terrain Gear (ATG) base or not.
Example
C:\>cctk --atgsystem=off
atgsystem=off
--audiomode
Valid Argument
disable, halfduplex, fullduplex
Description
Sets the audio mode to any of the following values:
• disable — Completely releases the onboard hardware resources.
• halfduplex — Allows only record or playback at a time.
• fullduplex — Allows record and playback simultaneously.
Example
C:\>cctk --audiomode=halfduplex
audiomode=halfduplex
--autoon
Valid Argument
Disable, Weekdays, Every Day, Select Days
Description
Congures the auto on option for a system. Using this option you can congure the days on which
the system has to turn on automatically.
• disable — Disables the auto on function on the system.
• everyday — Enables the auto on function on every day of the week.
• weekdays — Enables the auto on function on week days.
22