Deployment Guide

Introduction

Dell Command | Configure (Command | Configure) is a packaged software application that provides BIOS

configuration capability to business-client platforms. You can configure the client systems in two

methods: Using the Graphical User Interface (GUI) or using the Command Line Interface (CLI). This guide

provides the installation instructions for Command | Configure.

NOTE: Dell Command | Configure was formerly Dell Client Configuration Toolkit (CCTK). After

CCTK version 2.2.1, CCTK is rebranded as Dell Command | Configure.

Accessing Command | Configure installer

The Command | Configure installation file is available as a Dell Update Package (DUP) at dell.com/

support. To download the DUP:

1. Go to dell.com/support and browse to the Drivers and Downloads page.

2. Select the client system.

3. Select the operating system, and then select Systems Management as the category.

4. Select Command | Configure from the options, and then click Download.

Installation prerequisites

The prerequisites are listed in the following table:

Table 1. Installation Prerequisites

Systems Requirements

Windows

• The Command | Configure installation file, Systems-

Management_Application_HDWXV_WN_3.0.0_A00-00.exe available at

dell.com/support .

• Workstation running supported Microsoft Windows operating system.

• Administrator privileges on the system to install Command | Configure.

• Microsoft .NET 4.0, to install and run Command | Configure GUI.

NOTE: Select Microsoft .NET Framework 4.0 on the Turn Windows

features on or off screen on systems running Windows Vista or later

operating systems.

Linux

• The Command | Configure installation file, command_configure-

linux-3.0.0-<buildnum>.tar.gz available at: opt/dell/toolkit/bin.

• Workstation running supported Linux operating system.

• Red Hat Package Managers (RPMs) provided in the Command | Configure

installation file.

• Root login privileges.