Users Guide

450 |
ICA Scanner Driver Features
Pre-scanning the images from the printer (Preview)
Preview displays the pre-scanned image.
NOTE:
• This feature is available only with Document Glass (Flatbed) of Scan Mode.
1 Launch ICA driver user interface. A pre-scanned image will be displayed in the
preview pane.
2 Select the parameters from Scan parameters (Kind, Size, Resolution, Rotation angle,
Scan to, Name, and Format etc.) by clicking the corresponding drop-down list.
In case of Image Correction, move the slider to set the desired values.
Scan features Descriptions
Scan Mode Sets the source, i.e., Scan Mode to use - Document Glass (Flatbed) or
Document Feeder.
Kind Sets whether to scan in color or in black and white.
Resolution Sets the scan resolution.
Size Sets the size (Standard/Custom) of scanned documents.
Orientation Sets the orientation (rotation) of text and graphics on the page.
Use Custom Size Size - Sets the length and width of a custom size paper.
Rotation Angle - Sets the arbitrary rotation value for specified custom paper
size.
Auto Selection - Sets the dotted selector rectangle on the picture object or
overall document.
Scan To Sets the storage location for scanned images.
Name Sets the name of the scanned document.
Format Sets the file format in which scanned documents are to be saved.
Image Correction Sets the image correction parameters like Brightness, Contrast etc.
Sharpness Sets the sharpness to make the scanned image sharper or softer than the
original.
Sides to Scan Sets whether to scan both sides of a document.
Reduce/Enlarge Sets the reduction/enlargement ratio.
Auto Exposure Sets the background suppression level.
Hide Details/Show Details Sets whether to show or hide scan parameters.