Users Guide

426 | Jam/Alignment Problems
3 Use print media that is not damp.
Does this solve your problem?
The task is complete. Go to action 4.
4 Fan the print media.
Does this solve your problem?
The task is complete. Go to action 5.
5 Wipe the retard roller in the tray where the multi-feed
occurred with a cloth moistened with water.
Does this solve your problem?
The task is complete. Go to action 6.
6 Decrease the number of print media to be loaded to the
bypass tray.
Does this solve your problem?
The task is complete. Contact Dell.
Action Yes No