Manualshelf

Users Guide

ManualsBrandsDell ManualsAudioColor Smart Multifunction Printer S3845cdn
31323334353637383940
38 | Connecting and Setting Up Your Printer
Configuring the Optional Wireless Adapter
You can select a method to configure a wireless adapter from the following:
NOTE:
• The optional wireless adapter must be installed on the printer.
WPS-PBC
You can start Push Button Configuration only from the control panel.
1 Press the button.
2 Tap DeviceJConnectivityJWi-Fi.
3 Tap Manual Setup.
4 Tap Wi-Fi Protected Setup (WPS)JPBCJOK.
NOTE:
• Start the WPS-PBC on the wireless LAN access point (Registrar) within 2 minutes.
When the WPS operation is successful and the printer is rebooted, wireless LAN
connection setting is completed.
WPS-PIN
The PIN code of WPS-PIN can only be configured from the control panel.
1 Press the button.
2 Tap DeviceJConnectivityJWi-Fi.
3 Tap Manual Setup.
4 Tap Wi-Fi Protected Setup (WPS)JPIN.
5 Write down the displayed 8-digit PIN code for the wireless LAN access point.
6 Tap OK.
NOTE:
• Enter the PIN code into the wireless LAN access point (Registrar) within 2 minutes.
When the WPS operation is successful and the printer is rebooted, wireless LAN
connection setting is completed.
WPS-PBC
*1*3
WPS-PIN
*2*3
Auto SSID Setup
Manual SSID Setup
Dell Printer Configuration Web Tool
*1
WPS-PBC (Wi-Fi Protected Setup-Push Button Configuration) is a method to authenticate and register
devices required for wireless configuration, by pressing the button provided on your access point or wireless
router. This setting is available only when the access point supports WPS. Before starting WPS-PBC, check
where the WPS button (button name may vary) on the wireless LAN access point.
*2
WPS-PIN (Wi-Fi Protected Setup-Personal Identification Number) is a method to authenticate and register
devices required for wireless configuration, by entering PIN assignments into the wireless LAN access point.
This setting, performed through access point, is available only when the access points of your wireless
router supports WPS.
*3
For WPS operation on the wireless LAN access point, refer to the manual supplied with the wireless LAN
access point.