Users Guide

328 | Understanding Printer Messages
029-706 Wi-Fi error. A connection error occurred when he printer obtains a proxy auto-config
(PAC) file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subnet mask configuration
• DNS server address configuration
If the failure persists, the network or the HTTP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
029-707 Wi-Fi error. An error occurred when the printer obtains a proxy auto-config (PAC) file. The
file was not found. When Setup in Enable Proxy Server is set to Manual, check the file
location setting. When Setup in Enable Proxy Server is set to Configuration Script, the file
location setting on the DHCP server may have a problem. Consult your network
administrator.
If the file location setting is correct, check on the HTTP server to see if the PAC file exists.
Contact customer support if this failure is repeated.
029-708 Wi-Fi error. The proxy auto-config (PAC) file is invalid. When Setup in Enable Proxy Server
is set to Manual, check the file location setting. When Setup in Enable Proxy Server is set
to Configuration Script, the file location setting on the DHCP server may have a problem.
Consult your network administrator.
Contact customer support if this failure is repeated.
029-709 Wi-Fi error. A timeout error occurred when the printer obtains the URL of a proxy
auto-config (PAC) file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subnet mask configuration
If the failure persists, the network or the DHCP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
029-710 Wi-Fi error. An error occurred when the printer obtains a proxy auto-config (PAC) file. The
file was not found. Check with your network administrator to see if the URL of the PAC file
is registered in the DHCP server.
Contact customer support if this failure is repeated.
029-711 Ethernet 1 error. The proxy auto-config (PAC) file is invalid.
Ask your network administrator to see if the format is appropriate for JavaScript, and if the
file size is 64 KB or less.
Contact customer support if this failure is repeated.
029-712 Ethernet 1 error. A timeout error occurred when the printer obtains a proxy auto-config
(PAC) file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subnet mask configuration
• DNS server address configuration
If the failure persists, the network or the HTTP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
029-713 Ethernet 1 error. A connection error occurred when the printer obtains a proxy
auto-config (PAC) file. Check and correct the following:
• LAN cable connection
• Default gateway configuration
• Subn
et mask configuration
• DNS server address con
figuration
If the failure persists, the network or the HTTP server may have a problem. Consult your
network administrator.
Contact customer support if this failure is repeated.
Status Code Cause and Remedy