Users Guide

304 | Understanding Printer Messages
"018-001" - "020-999"
017-780 A job suspended with Print Around was automatically deleted after a certain period of
time.
Change the settings of Print Around if necessary.
017-782 An internal error occurred during image processing.
Contact customer support if this failure is repeated.
017-783 Memory became insufficient during processing.
• Lower the resolution.
• Set Output Color to Black & White.
017-784
017-785
017-786
An internal error occurred.
Contact customer support if this failure is repeated.
017-787 Google Cloud Print error.
Use a method other than Google Cloud Print.
017-789 Check the job parameter settings, and try again. Contact customer support if this failure is
repeated.
017-790
017-791
Check the time permitted for the operation for you, and try again. Consult your system
administrator to change your authorization.
017-792
017-793
017-794
017-795
017-796
017-797
017-798
017-799
You are not permitted to print. Consult your system administrator to change your
authorization.
Status Code Cause and Remedy
018-400 IPsec setting error.
Remove the inconsistency of the IPSec settings, and enable IPSec again.
• When Preshared Key is set in IKE Authentication Method, set the passcode.
• When Digital Signature is set in IKE Authentication Method, set an IPSec certificate.
018-405 An error occurred during LDAP authentication.
The account is disabled in Active Directory of the authentication server, or the access is set
to disabled. Consult your network administrator.
018-406
018-407
The machine detected the same IP address for Ethernet 1 and Ethernet 2 on different
networks.
Set different IP addresses to Ethernet 1 and Ethernet 2. If you want to set the same IP
address, contact our Customer Support at dell.com/contactdell.
018-408 IPv4 address duplication on the network of Ethernet 2.
Change the IPv4 address of Ethernet 2.
018-409 IPv6 address duplication on the network of Ethernet 2.
Change the IPv6 address of the device in the network.
018-410 Updating of the IPv4 address and host name for the DNS server failed on the network of
Ethernet 2.
Check whether the IP address of the DNS server is set correctly.
018-411 Updating of the IPv6 address and host name for the DNS server failed on the network of
Ethernet 2.
Check whether the IP address of the DNS server is set correctly.
Status Code Cause and Remedy