Users Guide

30 | Connecting and Setting Up Your Printer

Connecting and Setting Up Your Printer

To connect your printer to a computer or device, the following specification must be met

for each of the connection type:

USB 2.0 host port (for Smart Card)

USB 3.0 device port

Connecting to a Computer or a Network

NOTE:

• Before making connections, be sure to turn off the printer.

Connecting to a Computer Using the USB Cable (Direct

Connection)

A local printer is a printer which is directly connected to your computer using the USB

cable. If your printer is connected to a network instead of your computer, skip this section

Connection type Connection specifications

Ethernet 10BASE-T/100BASE-TX/1000BASE-T

USB USB3.0/USB2.0

Wireless (optional) IEEE 802.11n/802.11g/802.11b/802.11a

Phone connector RJ11

Wall jack connector RJ11

1USB Port

2 Phone Connector

NOTE:

• Do not connect any device (fax system)

other than a telephone or a telephone

answering device.

3 Wall Jack Connector

4 Wireless Adapter Socket

5USB Port

6 Ethernet Port