Users Guide

230 |Printing

Preparing to Use the Printer with Google Cloud Print™

To use Google Cloud Print™, you need the following preparations in advance:

• "Enabling Google Cloud Print™ on the Printer"

• "Selecting the Version of the Google Cloud Print™"

• "Registering the Printer to the Google Cloud Print™"

• "Sharing the Printer Using the Google Cloud Print™ Service"

NOTE:

• To register the printer to the Google Cloud Print™ service, the printer needs to be connected to the

Internet.

• Google Cloud Print™ supports only IPv4 connection.

• If the printer is connected to a network that uses a proxy server, you need to specify the settings in

Proxy Server from the Dell Printer Configuration Web Tool. For more information, see "Proxy

Server".

• Acquire a Google

account and a Gmail

address in advance.

Enabling Google Cloud Print™ on the Printer

1 Launch the Dell Printer Configuration Web Tool by entering IP address of the printer

in your web browser. For more information, see "Setting Up the Dell Printer

Configuration Web Tool" and "Starting the Dell Printer Configuration Web Tool".

2 Click ConnectionsJMobile PrintingJGoogle Cloud Print™.

3 Check the box to enable.

4 Click OK, and then restart the printer.

Selecting the Version of the Google Cloud Print™

Select the version of the Google Cloud Print

from either version 1.1 or version 2.0.

Google Cloud Print

version 1.1 sends the print data to the printer via Internet. For this

version, the printer needs to be connected to the Internet.

Google Cloud Print

version 2.0 sends the print data to the printer either via Internet or

via local network. This version is recommended for the environment where the Internet

connection cannot be used.