Users Guide

224 |Printing
memory until you request to print it from the operator panel.
NOTE:
• You must specify a passcode for the Secure Print job.
• For details about a printer driver feature, see the help of the printer driver.
Procedures for Printing Stored Jobs
NOTE:
• The stored print feature is available when using the PCL or PS driver.
1 Press the button.
2 Select Jobs.
3 Select a job to print.
Printing Secure Print Jobs From Operator Panel
This section describes how to print Secure Print jobs.
In case of you are logged in except Simple authentication
If authentication is enabled and the user ID on the secure print jobs matches the login
user ID on the device, you can access the secure print jobs without entering the passcode
specified at the printer driver.
1 Press the button.
2 Select Jobs.
3 Select Secure Jobs button.
4 Your secure print jobs are displayed. Select a job to print.
NOTE:
• If you want to print all jobs, select Print All. If you want to delete all jobs, select Delete
All.
In case of you are not logged in
If authentication is not enabled or you are logged in using Simple authentication, use
following procedure.
1 Press the button.
2 Select Jobs.
3 Select Secure Jobs button.
4 Secure print user’s folders are displayed. Select your folder.
5 Enter the passcode that you specified printer driver and select the OK button.
6 Your secure print jobs are displayed. Select a job to print.
NOTE:
• If you want to print all jobs, select Print All. If you want to delete all jobs, select Delete
All.
Deleting a Print Job
To delete printing a job, use the following procedure.