Users Guide

222 |Printing
5 In the Duplex drop-down list box, select Flip on Short Edge or Flip on Long Edge.
NOTE:
• For details on the Flip on Short Edge and Flip on Long Edge options, see "Flip on Short Edge"
and "Flip on Long Edge."
6 Click OK.
7 Click Print.
For OS X:
The following procedure uses TextEdit on OS X 10.10 as an example.
1 Open the file you want to print.
2 From the File menu, select Print.
3 Make sure that the Two-Sided check box is selected in the dialog box.
4 In the print options pop-up menu, select Layout.
5 In the Two-Sided drop-down list box, select Long-Edge binding or Short-Edge
binding.
6 Click Print.
Using Booklet Print
To use the booklet print feature, select the Enable check box of the Booklet Printing in
the Layout tab.
NOTE:
• When the XML Paper Specification (XPS) or PS driver is used, booklet print is not available.
• You must select Flip on Long Edge in the Duplex when using the Booklet Print feature.
Flip on Long Edge Assumes binding along the long edge of the page (left edge for portrait
orientation and top edge for landscape orientation). The following
illustration shows long-edge binding for portrait and landscape pages:
Portrait Landscape