Users Guide

196 | Dell Printer Configuration Web Tool
• When only one IP address (2001:D880:ABCD:EF01:0:20:3:4567) can be used:
– IP Address: 2001:D880:ABCD:EF01:0:20:3:4567
– IP Mask: 128
• When multiple IP addresses (2001:D880:ABCD:EF01:1:1:1:1 to
2001:D880:ABCD:EF01:FFFF:FFFF:FFFF:FFFF) can be used:
– IP Address: 2001:D880:ABCD:EF01:0:20:3:4567
– IP Mask: 64
NOTE:
• The setting applies to all features using TCP/IP, such as Print and Dell Printer Configuration Web
Tool.
• When using this feature, make sure to switch Transfer Mode for FTP to Active Mode to transfer the
scanned image from the machine via FTP. You can switch the FTP transfer mode from Dell Printer
Configuration Web Tool.
Domain Filtering
Select an option to filter domains.
When Allow Specific Domains is selected, you can specify domains to permit
transmissions. When Block Specific Domains is selected, you can specify domains to
prohibit transmissions.
To disable this feature, select Off.
Allowed Domains, Blocked Domains
When Domain Filtering is set to Allow Domains or Block Domains, you can specify up to
50 domains to allow or block transmissions.
Defaults and Policies
Common
Startup Page
Select whether to automatically print a startup page every time the printer is powered on.
• Do Not Auto Print
Does not print a startup page.
• Auto Print
Prints a startup page automatically.
Legal Original Size Auto Detection
Select whether to automatically detect the Legal size.
When enabling this feature, select 8.5 x 13” or 8.5 x 14” in Legal Original Size Option.
Resolve Original Size Detection Error
Select an action to be used if a document size detection error occurs for the Copy, Scan,
and Fax services separately.
To display a screen to enter a size each time a detection error occurs, select Prompt to
Enter Size.
To use the default size without entering a size each time, select Use Default Scan Size.