Users Guide

Dell Printer Configuration Web Tool | 181
Authentication Settings
Accounting
Click Accounting Method to select the accounting method and make the accounting
settings.
NOTE:
• In the Permissions screen, Accounting is displayed instead of Accounting Method when
Accounting Method is set to ColorTrack. To select the accounting method, click Accounting and
then select Accounting Methods. To set general accounts, click Accounting and then select
General Accounts.
Accounting Method
No Accounting
Does not perform accounting.
Log Failed Login Attempts Set the failure count to detect unauthorized access. An error is logged if
authentication fails the number of times specified in Failed Login Attempt
Limit within a predetermined time (10 minutes).
Limit Login Attempts of
System Administrator
This feature protects the settings from being changed by someone
impersonating your system administrator. If authentication for a system
administrator's ID fails more than specified times continuously, access is
denied.
You can specify a login attempt count from 1 to 10.
NOTE:
• The failure count is reset when the machine is restarted.
• To cancel the access rejection state, restart the machine by switching
off and on the power.
Server Authentication
Response Timeout
Set the server time-out response between 1 and 75 seconds in 1 second
increments.
Search Timeout Set the user information search time-out between 1 and 120 seconds in 1
second increments.
Display User Name Select from Hide, Hide Smart Card ID, and Show.
Obtain User Information
at Login
When you select On, the following user information is acquired at
authentication.
• Home directory used for My Folder
• E-mail address
• Certificate for encryption
Store Login Information
on Device
Select whether or not to save the user information used for remote
authentication. While the user information is saved in the machine, the
machine can authenticate the user using the information saved in the machine
even when the remote server is off.
NOTE:
• This setting applies only to a user who is authenticated by a card.
Delete Saved Login
Information
Select whether or not to delete the user information saved in the machine for
remote authentication. Select from Off, Weekly, and Monthly.
For Weekly, you can set the day and time. For Monthly, set the date and time.
To delete the user information immediately, click Delete Now.
NOTE:
• This setting applies only to a user who is authenticated by a card.