Users Guide

180 | Dell Printer Configuration Web Tool
Smart Card
Set the following Smart Card settings:
Logout Confirmation
Select the log-out confirmation method from the following:
Advanced Settings
Input Settings
Domain Controller • When no domain controller is registered:
Click Add or to add a domain controller. The Add Domain Controller
screen appears.
Set the new domain controller settings in the Add Domain Controller
screen.
• When any controller is registered:
The controller is displayed under Domain Controller. To edit an existing
controller, click the controller. The Edit Domain Controller screen appears.
Set the existing domain controller settings in the Edit Domain Controller
screen.
NOTE:
• Smart Card requires at least one domain controller.
Validate Enable the following as necessary:
Validate the domain controller certificate returned by the domain controller
server against the domain controller certificate stored on the Device.
Options Timeout Set the time-out between 1 and 120 seconds in 1 second
increments.
SNTP Select whether or not to enable SNTP.
Device Website Login
Method
You can select the website login method.
Log out user immediately.
Ask user for confirmation before logging out.
Case Sensitive User Name Select whether or not to ignore the case for log-in user name.
NOTE:
• This item is displayed when Login Method is set to other than
Convenience.