Users Guide

Dell Printer Configuration Web Tool | 179
• SMB (Windows ADS)
•LDAP
For details on the LDAP settings, see "LDAP".
Convenience
Set the following Convenience Login settings:
NOTE:
• This feature requires an additional application to be developed.
Specify Server By Select the server specification method from Domain Name and Domain
Name and Host Name/IP Address.
Default Server Domain Enter the domain name of the server.
NOTE:
• Use the NetBIOS or Active Directory
domain name for the domain name.
Server Address Specify the server address.
Add Additional Server Clicking Add Additional Server adds the Alternate Server section to the
screen. You can set Domain and Server Address for the alternate server.
Server Type You can select the server type from IPv4 and Host
Name.
IP Address : Port When selecting IPv4, enter the server IP address
and the port number.
When selecting Host Name, enter the host name.
NOTE:
• For IPv4, enter the address in the format
"xxx.xxx.xxx.xxx", where "xxx" is a numeric
value from 0 to 255. Do not use the
numbers assigned to the other ports.
Path Enter the server path.
Alternate Login Select whether or not to allow users to log in without their card.
Card Reader Select whether or not to disable the printer if the card reader is disconnected.
Accounting Codes Select from Get codes automatically from server. and Users must manually
enter codes at the Device.
Device Website Login
Method
You can select the website login method.