Users Guide

Dell Printer Configuration Web Tool | 167
Backup IP Address/Host
Name : Port
Enter the backup server IP address and the port
number.
NOTE:
• For IPv4, enter the address in the format
"xxx.xxx.xxx.xxx", where "xxx" is a numeric
value from 0 to 255.
• For IPv6, enter the address in the format
"xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx",
where "xxxx" is a hexadecimal value.
LDAP Server Select the software used by the directory server
from Microsoft Active Directory, Novell NetWare,
IBM Lotus Domino 6.x, Microsoft Exchange and
Other.
Advanced Settings Search Directory Root Enter a search root character string with up to 255
characters.
NOTE:
• Enter the distinguished name of the root
node. (Example: CN=users,
DC=mydomain, DC=dell, DC=com)
Advanced Settings Login Credentials for
Database Search
Select which users are allowed to search the
entries.
You can select from Logged-In User and
Predefined.
Login Name Enter the login name for searching in LDAP server
up to 255 characters.
Password Set a login password for the user specified in Login
Name. Up to 32 characters are allowed.
Retype Password Re-enter the password for confirmation.
Maximum Number of
Search Results
Set a maximum number of address to display from
search results from 5 to 100. If the search results
exceed the maximum, the search stops at the
maximum number set. The default value is 50.
Search Timeout Select whether or not to set a search time-out.
Timeout Set the value from 5 to 120 seconds in 1 second
increments.
LDAP Referrals Specify whether or not to re-establish connection
to another LDAP server if a currently connected
LDAP server requests to do so.
Maximum Number of
LDAP Referral Hops
When using the Referral feature, specify how many
times that a user is allowed to hop servers within 1
to 5 times.
Search Criteria Display Name Set whether or not to use the name attribute type
as a search entry when a name is used as a search
key.
Surname Set whether or not to use the surname attribute
type when a name is used as a search key.
Given Name Set whether or not to use the given name attribute
type when a name is used as a search key.
Perform Search On Perform Search On Sets the search order.