Users Guide

138 | Dell Printer Configuration Web Tool
Transmission Interval
Specify a value for the interval between the end of one transmission and the beginning of
the next.
A longer transmission interval increases the total time to send a broadcast transmission,
but allows calls to be received during the standby time.
Error Correction Mode (ECM)
Set whether or not to use the Error Connection mode (ECM). In the ECM transmission,
the machine confirms if the data is sent correctly and when the data is not sent correctly,
resends the data.
Super G3
Set whether or not to use the Super G3 mode.
Batch Send
When the machine stores multiple faxes addressed to a destination, enabling the Batch
Send feature allows you to send them all at the same time in a single fax transmission. By
using this feature, you can reduce your communication costs. Select whether or not to
enable the Batch Send feature.
Fax Receive Mode
Set the default value for Receive Mode in the Fax App screen displayed by selecting
DeviceJAppsJFax. Select whether or not to receive a fax automatically or manually.
Force Page Break
Set the length to make a page break that will be applied when the length of a received fax
document is longer than the paper length.
Incoming Fax Filtering
You can reject the fax reception according to the fax number.
Select Block Unknown Connections to reject the withheld number.
Select Block Excluded Fax Numbers and Addresses to reject the unregistered number.
To set specific number, enter G3 IDs (fax number) from which you want to reject a fax
reception under Excluded Numbers and Addresses. You can specify up to 50 G3 IDs.
NOTE:
• You can find the G3-ID of the sender that you want to reject in "Remote Station" column of an
Activity Report or "Input Source" column of a Job History Report.
Secure Fax Receive
Set whether or not to enable the secure receive feature. When you enable this feature,
also set a passcode.
NOTE:
• See "Using Secure Fax Receive".
Auto Tray Switching
The machine automatically switches the paper tray when the paper loaded in the
selected tray runs out.