Install Guide

S3845cdn CACStar User Guide Rev A01

all IPs

box is checked, an admin can access the CACStar configuration

items from a PC at any IP address if he knows the ID and password.

If it is not checked, the admin must access the CACStar configuration

pages from the IP addresses specified for Administrator #1 or #2.

These addresses must be on the same subnet as the CACStar.

Allow Telnet

If this is enabled CACStar will allow a Telnet session to occur. The

Telnet session will happen over Port 23. Telnet use with CACStar is

intended for diagnostics by the developers.

Allow Non-Secure Port 8080

If this is enabled, CACStar will use Port 8080 and HTTP for HTML.

Otherwise, Port 8443 and HTTPS will be used for HTML. Changing

this setting requires a reboot of CACStar.

Power-on Print Summary

When enabled, CACStar will automatically print a summary page

after power-on initialization is complete. This is the default setting.

Disable Front Panel Configuration

If this is checked, CACStar will disable the Front Panel keyboard from

changing the IP address, subnet mask, and gateway. Viewing of

these settings on the front panel LCD will still be allowed.

Disable Front Panel Configuration

If this is checked, CACStar will suppress NBSS traffic from the printer.

This setting is only required when SMB/Kerberos Proxy is enabled

and the local network does not allow NBSS traffic.