Concept Guide

S3845cdn / CACStar Configuration Guide
2018

Figure 1: Location of MAC Address Label
By default, the CACStar option acquires its IP address via DHCP, so after the MAC address is registered with the
switch, you can connect the LAN cable to the port on the CACStar option, and turn the printer on.
As soon as CACStar acquires an IP address, a CACStar summary page will automatically print (later, during
configuration, this automatic printout can be disabled.) On this summary page, the acquired IP address will be
shown on the third line of the summary page, under “LAN MFD IP Address”. This is the address that will always
be used to connect to the MFD and CACStar administration web pages.
2.2 GATHERING INFORMATION
The basic information that is required to successfully authenticate includes:
- Domain controller name
- Domain Name
- Kerberos Realm
- IP Address for NTP server (usually the domain controller’s IP address)
- Search Base for LDAP queries
- SMTP server address
Most of this information can be acquired using a command, included in Windows, called GPResult. To use the
command, open a command prompt or PowerShell. Change the current directory to a folder for which you have
“write” permissions. Then enter the following command:
gpresult /r > gpresult.txt