Concept Guide

S3845cdn / CACStar Configuration Guide
2018

Setting
Description
Kerberos Email Authentication
When “checked”, GSSAPI authentication is used when
connecting to the SMTP server. Note: CACStar’s Kerberos
authentication feature must be enabled before enabling
this setting.
Leave this setting unchecked (disabled) unless your System
Administrator tells you that authentication is required for
the SMTP server. For digital senders, it is unusual to
require authentication to SMTP servers.
The default setting is Disabled (“unchecked”).
4.3 SCAN TO NETWORK FOLDER
Scan to Network Folder is starting to see increased use in DOD environments. You will want to one of these
locations:
- The users Active Directory “Home Folder”
- A fixed network folder, which multiple users might use for scanned file storage
- A ‘dynamic’ folder location, based information about the user. This is similar to, but not the same as, the
Active Directory “home folder”.
When the S3845 has been configured with the LDAP Search Base (see section 3.3 for more information), and the
MFD SMB Kerberos Proxy has been enabled (as indicated in section 3.4) your printer is already configured to
support scanning to the Active Directory “Home Folder”.
When scanning to network folders, it is important to make sure that the “MFD SMB Kerberos Proxy” is enabled in
the CACStar admin web site (the location of this setting is shown in step 3 of section 3.4. This will ensure that the
cardholder’s credentials are used when storing the scanned file.
Additional scanning destinations may be configured via the admin web site on the MFD (see the S3845 User Guide
for more information.
“Dynamic” network folder paths are accessible by using the CACStar “SMB Address Book”. The SMB Address Book
provides “virtual servers” that can be referenced by MFD address book entries to provide access to dynamic
network folder paths. Discussion of the SMB Address Book is found in section 4.3.1.
Note: When creating additional scanning destinations, you will need to enter a
username and password for the address book entry, but they will not be used
for the actual transfer itself.