Concept Guide

S3845cdn / CACStar Configuration Guide
2018

- Copy (simple copy functionality)
- Fax (sending of scanned documents over an analog phone line using Fax communications commands)
Applications that are always CAC-enabled:
- Scan to Email (usually send-to-self only, but can also allow for Global Address Book via LDAP)
- Scan to Network Folder (Active Directory “Home Folder” or another network folder)
- Print Release (the printer holds your document until you authenticate at the printer and release it.
You will likely use one or more of these applications, but you might not use them all. Consult with your System
Administrators to determine which of these applications will be used.
4.1 CONFIGURING ACCESS FOR APPS
When the CACStar option is installed using version “A01” of the CACStar setup file (see section 3.1), the printer will
already be set so that Copy Apps (Copy, ID Card Copy) are available to all users without authentication, while all
other apps require authentication for access.
To change the configuration for which apps are available to guest (unauthenticated) users, refer to the S3845cdn
Users Guide (“Dell Printer Configuration Web Tool”->”Permissions” ).
4.2 CONFIGURING SCAN TO EMAIL
Upon installation of the CACStar option, the MFD will be configured for “email to self only” (i.e. email can only be
sent to the authenticated user’s email, and no additional recipients can be selected. This is the typical
configuration for DOD environments.)
To verify proper configuration of the MFD itself, log into the S3845 admin web site as “admin”, and go to the
“Connectivity” section of the website, and select “SMTP” to view the MFD settings for connectivity. Important!