Users Guide

Discovery Object Description
• Supported Dell Command | Monitor or OMCI service is not
installed.
• Lower version than OMCI 8.1 is installed
• Dell Command | Monitor or OMCI service has been stopped or
disabled
• Client system is a Dell Vostro system.
Dell Client Group population discovery
Discovers the Dell Clients group with Managed and Unmanaged
Clients groups.
Monitoring
The Dell Client Management Pack enables you to monitor the discovered Dell client systems. The Health status indicators helps you to
monitor the health of the Dell client systems on the network.
Health status indicators
The following table lists the icons that indicate the health status of the discovered Dell client systems on the OpsMgr console. For more
information about severity propagation, see State Views.
Table 6. Icons and Severity levels
Icon Severity Level
Normal/OK - The component is working as expected.
Warning/Noncritical - A probe or other monitoring device has
detected a reading for the component that is above or below the
acceptable level. The component may still be functioning, but it
could crash. The component may also be functioning in an impaired
state.
Critical/Failure/Error - The component has either failed or failure
is imminent. The component requires immediate attention and may
need replacement. Data loss may have occurred.
The specific component is not monitored.
The service is unavailable.
Views
You can monitor the Dell Client systems using the following views:
• Alerts Views
• Diagram Views
• State Views
Alerts views
The Alerts Views displays alerts for the events received from the supported Dell Command | Monitor or OMCI service running on the
systems that you are monitoring. To view the alerts for the systems you are monitoring:
1. In the OpsMgr console, click Monitoring.
2. In the Monitoring pane, navigate to the Dell folder and click the folder to display the different views.
8
Dell Client Management Pack 6.3 operations