Release Notes

What’s New?
• Support for Dell Command | Monitor (DCM) v9.1.
• Added a unit monitor for Battery Charging status.
• Added an alert for Error-correcting Code (ECC) Memory.
Known Issues
Issue (342472):
On few Dell Client platforms, health status does not change to normal after the Dell Client recovers from
the Fan Probe error.
Description
On R5400, T7400 and Optiplex 390 systems, health status does not change to normal after the Dell
Client recovers from Fan Probe error.
Resolution
Reboot the Dell Client to clear the status of the Fan probe.
Issue (499508):
When an additional battery is added to the Dell Client, the battery part number of the added battery is
not discovered.
Description:
On Dell Client laptops that support multiple batteries, when an additional battery is added, the battery
part number for the added battery is not discovered in the subsequent discovery cycles.
Resolution:
Reboot the laptop.
Issue (499881):
Chassis intrusion health status does not change even after chassis is removed.
Description:
On Optiplex 990(with bios: A05) and 390(with bios: A01), Chassis intrusion health status does not change
even after chassis is removed. BIOS does not support such events, and hence the OMCI does not expose
this health for the above platforms. As a result, Client Management Pack shows the components as
healthy.
Workaround
Upgrade to latest BIOS version.