Users Guide

Groups Unit Monitor Name Default Periodic Poll Setting

(60 minutes)

Processor Group for Dell

Client

Periodic 3600 seconds

(60 minutes)

Processor Unit Instance Periodic 3600 seconds

(60 minutes)

Sensors of Dell client systems

• Battery

• Current

• Fan

• Intrusion

• Temperature

• Voltage

Periodic 3600 seconds

(60 minutes)

Storage Group for Dell Client Periodic 3600 seconds

(60 minutes)

Disk Unit Instance Periodic 3600 seconds

(60 minutes)

NOTE: When chassis door is removed or closed, Dell Command | Monitor or OMCI generates

Chassis Intrusion events. For more information on enabling, disabling, and clearing Chassis

Intrusion events, see System Setup (BIOS) in the Owner's Manual of the Dell client system.

NOTE: Monitoring for memory is available at the Group level only.

Customizing unit monitors

You can customize the following parameters of the Dell Client Management Pack unit monitors by using

overrides:

• Enabled — Allows you to enable or disable Monitors. You can set the Override setting to True or

False. The default setting is True.

• Interval in Seconds — The frequency in seconds with which the Dell Management Pack polls the Dell

device to check the health of a component. The default is 3600 seconds (60 minutes).

The unit monitors are triggered by a periodic poll configured as interval seconds.