Users Guide

Groups Unit Monitor Name Default Periodic Poll Setting

(60 minutes)

Processor Group for Dell

Client

Periodic 3600 seconds

(60 minutes)

Processor Unit Instance Periodic 3600 seconds

(60 minutes)

Sensors of Dell client systems

• Battery

• Fan

• Intrusion

• Temperature

Periodic 3600 seconds

(60 minutes)

Storage Group for Dell Client Periodic 3600 seconds

(60 minutes)

Disk Unit Instance Periodic 3600 seconds

(60 minutes)

NOTE: When chassis door is removed or closed, OMCI generates Chassis Intrusion events. For

more information on enabling, disabling, and clearing Chassis Intrusion events, see System Setup

(BIOS) in the Owner's Manual of the Dell client system.

NOTE: Monitoring for memory is available at the Group level only.

Customizing Unit Monitors

You can customize the following parameters of the Dell Client Management Pack unit monitors by using

overrides:

• Enabled — Allows you to enable or disable Monitors. You can set the Override setting to True or

False. The default setting is True.

• Interval in Seconds — The frequency in seconds with which the Dell Management Pack polls the Dell

device to check the health of a component. The default is 3600 seconds (60 minutes).

The unit monitors are triggered by a periodic poll configured as interval seconds.

Object Discoveries

Table 7. Dell Discovery Object

Discovery Object Description Groups

Discover Hardware Components

for Dell Client systems

Discovers the disk, memory,

sensors, and processor of your

system.

Dell clients

Dell client instance