Owner's Manual

Supported Dell Devices
Supported Client Systems: All Dell OptiPlex, Precision and Latitude systems that are supported by Dell OpenManage Client
Instrumentation version v8.1 and later are managed using the Dell Client Management Pack v5.1.
Upgrade
You can upgrade Dell Client Management Pack 5.0 to Dell Client Management Pack 5.1.
For information on upgrade to Dell Client Management Pack v5.1, see the "Dell Client Management Pack Version 5.1 For
Microsoft System Center Operations Manager Installation Guide".
NOTE: You cannot apply Dell Client Management Pack 5.1 as an upgrade over Dell Management Pack 3.x or any other
versions prior to Dell Management Pack 3.x. Importing the Dell Client Management Pack v5.1 over the Dell Management
Packs v3.x is not a supported configuration.
Uninstallation
For information on uninstalling the Dell Client Management Pack v5.1, see the "Dell Client Management Pack Version 5.1 For
Microsoft System Center Operations Manager Installation Guide".
NOTE: The Installation Guide (DellMPv5.1_Client_IG.pdf) is available under the folder where you extracted the Dell Client
Management Pack v5.1.
Open Issues and Resolutions
Fixed Issu es/def
Issue 1 - 342472: On few Dell Client platforms, health status does not change to normal after the Dell Client recovers from
the Fan Probe error.
Description:
On R5400, T7400 and Optiplex 390 systems, Health status does not change to normal after the Dell Client recovers from Fan
Probe error.
Resolution:
Reboot the Dell Client to clear the status of the Fan probe.
Issue 2 - 499508: When an additional battery is added to the Dell Client, the battery part number for the added battery is
not discovered.
Description:
On Dell Client Laptops that support multiple batteries, when an additional battery is added, the battery part number for the
added battery is not discovered in the subsequent discovery cycles.
Resolution:
Reboot the laptop.