Owner's Manual

Groups Unit Monitor Name Default Periodic Poll Setting

Processor Group for Dell Client Periodic 3600 seconds

(60 minutes)

Processor Unit Instance Periodic 3600 seconds

(60 minutes)

Sensors of Dell client systems

• Battery

• Fan

• Intrusion

• Temperature

Periodic 3600 seconds

(60 minutes)

Storage Group for Dell Client Periodic 3600 seconds

(60 minutes)

Disk Unit Instance Periodic 3600 seconds

(60 minutes)

NOTE: When chassis door is removed or closed, OMCI generates Chassis Intrusion events. For more information

on enabling, disabling, and clearing Chassis Intrusion events, see System Setup (BIOS) in the Owner's Manual of

the Dell client system.

NOTE: Monitoring for memory is available at the Group level only.

Customizing Unit Monitors

You can customize the following parameters of the Dell Client Management Pack unit monitors by using overrides:

• Enabled — Allows you to enable or disable Monitors. You can set the Override setting to True or False. The

default setting is True.

• Interval in Seconds — The frequency in seconds with which the Dell Management Pack polls the Dell device to

check the health of a component. The default is 3600 seconds (60 minutes).

The unit monitors are triggered by a periodic poll configured as interval seconds.

Object Discoveries

Table 7. Dell Discovery Object

Discovery Object Description Groups

Discover Hardware Components for

Dell Client systems

Discovers the disk, memory, sensors,

and processor of your system.

Dell clients

Dell client instance

Hardware components of Dell client

Storage group for Dell client

Disk unit instance

Memory group for Dell client

Processor group for Dell client

Processor unit instance

Sensor group for Dell client

OMCI Services discovery Discovers the OMCI services. Dell clients

Dell client instance